CorelDraw can handle vector graphics, using CorelDraw output picture quality better. I took a few steps to import images from CorelDraw to AlTiumDesigner and summarized them as follows: 1. Open a vector with CorelDraw (example in the attachment), as shown below. Figure 1 Original example Figure 2 Inverse white effect 2, want to do its anti-white, so its line and fill into white, while adding a black filled rectangular box, and move it to the bottom, the effect is shown in Figure 2. 3, select the file, export bmp format, select the black and white mode, other parameters set according to the situation, as shown in Figure 3. Figure 3 CorelDraw output bitmap parameter settings 4. Open AlTIumDesigner and select DXP->Run Script in the upper left corner. Then browse to find PCBLogoCreator.PRJSCR. The result is shown in Figure 4. Figure 4 script dialog 5, double-click the bottom of the Runconverter, pop-up dialog box shown in Figure 5, through the load to find the previous generated bmp file, a reasonable setting Scaling Factor, to get the appropriate size of the image (Image Size). Select board Layer as Top Overlayer. Figure 5 PCB Logo Creator Dialog 6. Click Convert to convert. If the bmp image is large, the conversion time will be longer. The converted effect is shown in Figure 6. Figure 6 after the conversion effect Shenzhen ChengRong Technology Co.,Ltd. , https://www.laptopstandsuppliers.com
