4.2mm Wire To Board Connectors
4.2mm Wire To Board Connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
4.2 mm pitch connectors wire to board connectors
Fully isolated terminals, positive locking housings, low-engagement forces and polarized housings, also offers blind mating, TPA and higher current options. Pitch 4.20mm
Circuit Board Connectors,4.2Mm Wire To Board Connectors,4.2Mm Pcb Wire To Board Connector,4.2Mm Pin Wire To Board Connector,.165" Wire To Board Connectors,4.2mm Power Connector ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com
With a brightness of 1000 lumens, the screenless TV Z5 boasts a good viewing effect even during daytime viewing, making the use of non-screen TVs more free and reducing the need for the environment. The standard resolution is 1280*800, and the compatible resolution is up to 4K, allowing users to choose more freely for the source. In terms of intelligent hardware, the Z5 screenless TV adopts the Cortex-A53 quad-core Mst**A838 processor. The standard 2GB+16GB memory combination can ensure smooth operation of the non-screen TV. 
So how to use a meterless screen TV Z5 to install third-party software? In fact, the method is very simple.
ã€installation steps】
1, open the meter without screen TV Z5, in order to open the system settings → about → mobile phone assistant 
4.2 mm pitch connectors wire to board connectors Including:
male housing
Male housing of connector, UL94V-0 and UL94V-2, hanging and panel mount, single row and dual row, 2 to 24 circuits.
Female housing
Female housing of connector, with locking latch in order to avoid loosing, and with polarity in order to avoid dis-mating. One row and dual rows, from 2 circuits to 24 circuits.
Terminal
The conductor of connector, brass or phosphor bronze, tin plated over nickel, selective gold plated as customer's requirement.
Header
Header, right angle and vertical , with peg and without peg, DIP soldering, single row and dual row, 2 to 24 circuits.
4.2 mm connectors wire to board connectors General Specification:
Current rating: 6A AC, DC.(AWG#18)
Voltage Rating: 600V AC,DC
Withstanding Voltage: 1500V AC/minute.
Insulation resistance: 1000MΩ min
Contact resistance: Initial Value/ 10mΩ max
Temperature rise: -40'C ~ 105'C.
Did the meterless screen TV Z5 watch live TV? Third-party software installation tutorial
Zimi Z5 is the latest non-screen TV launched by Kamitsu Technology in 2017. Its appearance is similar to that of Kemi H1. The overall fashion sense is full, exquisite and light, and can be easily used at different locations in the home, allowing users to see The big piece is not limited to the living room.
2. Pop up the QR code downloaded by the meter assistant. Scan the QR code with the mobile phone browser to download and install the meter assistant.
3, mobile phone and rice no screen TV Z5 in the same wifi connection, select the application, open the search application search sofa butler, click on the remote installation, wait a moment to install successfully
5, the installation is complete, after installing the sofa butler can directly download the TV version of the video, movie, live, games and other applications through the sofa butler, such as the common TV cat, magic video, small micro-broadcast and the like live TV software!
Sofa butler downloads the TV cat, live TV screen
It's great to use a large display to watch the live TV experience.