Distributed routing Tenda nova MW6 all questions the most complete answer

1. What is the difference between the Tenda distributed routing nova MW6 and the ordinary mother router/amplifier?

Distributed routing Tenda nova MW6 all questions the most complete answer

Tenda distributed routing nova MW6 supports Mesh technology, which can automatically network and automatically optimize the network. After one of the routes is successfully set up on the Internet, other routes can be automatically configured to form a mesh network, plug and play. In addition, when the network fails, the network can be automatically repaired to ensure smooth and stable home WiFi. Wireless Mesh networks are more widely and more stable than traditional wireless networks.

Distributed routing Tenda nova MW6 all questions the most complete answer

Second, what is the black technology used by Tenda's distributed routing nova MW6?

Mesh technology is a new type of wireless networking technology. In a wireless Mesh network (also known as a "multi-hop (mulTI-hop)" network), all nodes are connected to each other to form an overall network. Each node has multiple pieces. The connection channel makes the routing more flexible, the data transmission is faster, and the coverage is wider.

Third, Tenda distributed routing nova MW6 package consists of how many routes? Is there a distinction between primary and secondary?

There are two types of Tenda distributed routing nova MW6 kits, one is 3 packs and the other is 2 packs. There is no primary or secondary route in the package. When one of the routers is successfully connected to the network, it automatically becomes the primary route.

Fourth, the first use of Tenda distributed routing nova MW6, how to install networking?

1. The mobile phone first downloads the "Tenda WiFi" APP, then first connects the power of the first nova route, and then connects the network cable to the WAN port of the nova router. Connect the phone to the WiFi of the first nova router, open the “Tenda WiFi” app, follow the instructions on the page to complete the Internet settings and wireless settings. When the indicator light of the router is blue, the connection is successful.

2. For the rest of the nova routes, just turn them on and wait for about 1 minute to automatically network; the rest of the nova's WiFi name and password will be automatically synchronized with the first nova, no need to set. After successful automatic networking, adjust the position according to the nova indicator to get the best connection quality.

Distributed routing Tenda nova MW6 all questions the most complete answer

5. I have used 3 nova routes to build a WiFi network system. How do I add a new nova router?

Place the new nova route within the WiFi coverage of the networked main nova route and power it on. When the phone opens the Tenda WiFi app, the page will prompt for a new device to try to join the network, click "Allow to join".

Distributed routing Tenda nova MW6 all questions the most complete answer

6. How many nova routes can I access in the same network?

A maximum of 10 nova routers can be connected to a network. Considering stability, it is generally recommended to use 6 networking.

7. Can a single Tenda distributed route be used?

Yes, the routers in the Tenda nova MW6 package can be used in combination or separately. When used alone, they can be used as normal routers.

Eight, the nova route that has been networked, want to use it separately, how to operate?

You need to remove the group from the nova route that you want to use separately in the app, or you can restore it to factory settings and use it separately.

Nine, nova router how to restore the factory settings?

In the power-on state, hold down the bottom Reset hole with a paper clip, a pen, etc. for 20 seconds without releasing the hand. When the indicator light turns white, the reset is successful.

Distributed routing Tenda nova MW6 all questions the most complete answer

SMD Transformer


SMD transformer Description: small size, high working frequency, high adhesion performance, small distribution inductance;It is mainly used for module power supply, laptop, mobile phone and ultra-thin electric appliance.

The transformer consists of an iron core (or magnetic core) and a coil. The coil has two or more windings, of which the winding connected to the power supply is called the primary winding and the rest is called the secondary winding.It can change ac voltage, current and impedance.The simplest core transformer consists of an iron core made of a soft magnetic material and two coils with different turns on the core.



SMD Transformer, Ee16 Transformer, Power Transformer, Electric Transformer

YANGZHOU POSITIONING TECH CO., LTD. , https://www.yzpst.com