I. Notice on the issuance of the national standard "Code for the Acceptance of Construction Electrical Engineering Quality" Jianbiao [2002] No. 82 This specification is based on the requirements of the Ministry of Construction's Notice on Printing and Distributing the National Standards for the Construction and Revision of Engineering Construction in the Year 2000-2001 (Jianbiao [2001] No. 87), and the Zhejiang Construction Department is responsible for organizing the editorial unit Zhejiang. Provincial Kaiyuan Installation Group Co., Ltd. (formerly Zhejiang Industrial Equipment Installation Company) will work with the relevant units on the "Quality Inspection and Evaluation Standard for Building Electrical Installation Engineering" GBJ303-88, "Code for Construction and Acceptance of Wiring Engineering for 1kV and Below Electrical Installations" GB50258-96, "Electrical Installation Engineering Electrical Installation Lighting Construction Acceptance Specification" GB50259-96 revised. Beijing Construction Engineering Quality Supervision Station Hangzhou Construction Engineering Quality Supervision Station Zhejiang Architectural Design Institute Shanghai Construction Engineering Quality Supervision Station Main drafters: Qian Dazhi, Wang Zhensheng, Fu Ciying, Liu Boping, Lin Han, Xu Naiyi, Li Weiyu Infrared Optical,Zinc Selenide Lens,Optical Zinc Selenide Lens,Optical Imaging Lens Danyang Horse Optical Co., Ltd , https://www.dyhorseoptical.com
According to the requirements of the Ministry of Construction's Notice on Printing and Distributing the National Standards for the Construction and Revision of Engineering Construction in the Year 2000-2001 (Jianbiao [2001] No. 87), the Zhejiang Provincial Construction Department and the relevant departments jointly revised the "Architecture Electrical Engineering Construction Quality Acceptance Specification. The relevant departments of our department have reviewed the regulations and are now approved as national standards, numbered GB50303-2002, and will be implemented as of June 1, 2002. Among them, 3.1.7, 3.1.8, 4.1.3, 7.1.1, 8.1.3, 9.1.4, 11.1.1, 12.1.1, 13.1.1, 14.1.2, 15.1.1, 19.1.2, 19.1.6, 21.1.3, 22.1.2, 24.1.2 are mandatory provisions and must be strictly enforced. Original "Building Electrical Installation Engineering Quality Inspection and Evaluation Standards" GBJ303-88, "Electrical Installation Engineering 1kV and below Wiring Engineering Construction and Acceptance Specifications" GB50258-96, "Electrical Installation Engineering Electrical Lighting Installation Acceptance Specification" GB50259-96 At the same time abolish.
This specification is managed by the Ministry of Construction and explains the mandatory provisions. Zhejiang Kaiyuan Installation Group Co., Ltd. is responsible for the interpretation of specific technical contents. The Institute of Standards and Standards of the Ministry of Construction organizes the publication of the China Planning Press.
Second, the foreword
During the preparation of this specification, the compilation team conducted a wide range of investigations and studies, summed up the practical experience of construction electrical engineering construction quality control and quality acceptance in China, and adhered to the guidance of “examination and separation, enhanced acceptance, improvement means, process controlâ€. Under the premise of the principle, it is in line with the "Uniform Standard for the Acceptance of Construction Engineering Quality" GB50303-2001, and solicits the opinions of the relevant units of design, supervision and construction. The review was finalized in October 2001.
This specification is a mandatory standard with mandatory provisions. It is to control and accept the construction quality of building electrical engineering with emphasis on ensuring engineering safety, function, human health, environmental benefits and public interests. At the same time, a few provisions on the appearance quality requirements are also appropriately defined.
This specification may require partial revision in the future. Information and provisions on partial revisions will be published in the Journal of Engineering Construction Standardization.
The provisions of this Code marked in bold type are mandatory and must be strictly enforced.
In order to improve the quality of the standard, all units are required to pay attention to summing up the experience and accumulating information in the process of implementing this standard. At any time, feedback to the Zhejiang Kaiyuan Installation Group Co., Ltd. (Address: No. 21, Kaiyuan Road, Hangzhou, Zhejiang, China) Code 310001) for reference at the time of revision.
The chief editor, the editorial unit and the main drafters of this specification:
Chief Editor: Zhejiang Kaiyuan Installation Group Co., Ltd.
Participating unit:
For details, please click to download: http://bbs.lightingchina.com/dispbbs_18_20412_1_1.html