In order to ensure the safety of electricity, electric power personnel should check the wire and cable every day. If foreign matter is found on the wire, it must be cleaned up in time. In the past, electricians had to clean up at high altitudes. It was very dangerous. Now, with the "laser cannon" to clean up the artifacts, the cleaning work becomes safe and efficient. So how does the "laser cannon" work? Let's take a look. A laser beam, long-distance operation, without climbing the high-voltage tower, with the help of this "laser cannon" in front of the high-pressure tower can remove foreign matter hanging on the wire. The staff said that this "laser cannon" is actually a "grid foreign body remover", which is a remote cleaning system for foreign objects in the grid based on ground-directed emission energy. It is mainly composed of a laser generator, a scope, a hand-held controller, and an electric pan/tilt head. The staff of the live working class of the transmission room of the State Grid Xiamen Power Supply Company: It is now aiming at this foreign object and clearing it after alignment. Align the laser beam emitted by the “Grid Foreign Material Cleaner†on the ground at a right angle of 90 degrees to the appropriate focal length and corresponding laser emission power. As long as the linear distance is within 120 meters, the “laser cannon†The winding can be cut off by a high energy, high temperature beam. Guo Xiaohua, the deputy squad leader of the live working class of the power transmission room of the State Grid Xiamen Power Supply Company: (wound foreign objects) mainly include plastic film, kite line, celebration balloon, sunshade net, green gauze, etc. The foreign object discovered by us, according to its different materials , the modulation of different melting points directly cut, (laser emission) high temperature is 300, then our power line is basically aluminum material, aluminum melting point is 400 degrees, so it is harmless to our body material. It is understood that in Fujian Province, the State Grid Xiamen Power Supply Company was the first to use the "Grid Foreign Material Remover" for foreign object demolition operations. Since it was put into use in August last year, it has handled more than 50 foreign materials wound around the city. At the same time, this new equipment not only completely replaces dangerous manual work, but also greatly improves work efficiency and saves manpower and material costs for aerial work. Guo Xiaohua, deputy squad leader of the live working class of the transmission room of the State Grid Xiamen Power Supply Company: For manual treatment, the fastest time is half an hour to an hour. If it is slow, three or four hours. If the foreign object remover is used, it is basically that we set up the aiming launch. It takes about ten minutes to solve a foreign object.
All in one pc is a new trend for desktop type computer nowadays. What you can see at this store is Custom All In One PC. There are 19 inch all in one pc, 21.5 All In One PC, All In One PC 23.8 Inch and 27 inch all in one pc, which are the main sizes at the market. How to choose the most suitable one for special application? According to clients` feedback, 19.1 inch entry level, 21.5 inch middle and low level, 23.8 or 27 inch higher level-All In One PC I7. Some clients may worry the heat-releasing since equipped releasing fan into the back of monitor, see no releasing fences on back cover. However, totally no need worry that point, cause special back cover material and releasing holes can meet the demand of heat releasing.
You can see All In One Business Computer, All In One Gaming PC, and All In One Desktop Touch Screen series at this shop.
Any other unique design or parameters, just feel free to contact us so that can get right and value information quickly.
Believe will try our best to support you!
All In One PC,All In One Pc I7,Custom All In One Pc,All In One Pc 23.8 Inch,21.5 All In One Pc Henan Shuyi Electronics Co., Ltd. , https://www.sycustomelectronics.com