Instruction Manual
1. Features
Clock display, 10 sets of adjustable timed power control, randomized power control, manual switch and optional DST setup.
2. First time charging
This Timer contains a rechargeable battery. It is normal that the new/old model runs out of battery if it wasn`t being charged for a long period of time. In this case, the screen will not turn on.
To charge : simply plug the timer to a power outlet. The charging time should take at least 15 minutes.
If the screen doesn`t light up or displays garbled characters, simply reboot the system by pressing the [RESET" button.
3. Set clock
Hold [CLOCK" button and [WEEK" button to adjust week.
Hold [CLOCK" button and [HOUR" button to adjust hour.
Hold [CLOCK" button and [MINUTE" button to adjust minute.
Hold [CLOCK" button and [TIMER" button to select 12 hour/24 hour display.
Hold [CLOCK" button and [ON/AUTO/OFF" button to enable/disable DST (daylight-saving-time).
4. Set timer
Press [TIMER" button, select and set timer. Setting rotation : 1on, 1off, 2on, 2off, ...... , 10on, 10off.
Press [HOUR" button to set hour for timer.
Press [MIN" button to set minute for timer.
Press [WEEK" button to set weekday for timer. Multiple weekdays can be selected. ex: if selected [MO", the timer will only apply on every Monday; if selected [ MO, WE, FR", the timer will apply on every Monday, Wednesday and Friday.
Press [RES/RCL" button to cancel the selected on or off timer. The screen will show "-- -- : -- --" , the timer is canceled.
Press [RES/RCL" button again to reactivate the timer.
When timers are set, press [CLOCK" to quit timer setting and return to clock.
5. Random function
Press [RANDOM" button to activate random function, press again to cancel function.
System only runs random function when [AUTO" is on.
Random function will automatically start the timer from 2 to 32 minutes after the setting.
ex : if timer 1on was set to 19:30 with the random function on, the timer will activate randomly between 19:33 to 20:03.
if timer 1off was set to 23:00 with the random function on, the timer will activate randomly between 23:02 to 23:32.
To avoid overlapping, make sure to leave a minimum of 31 minutes gap between different sets of timer.
6. Manual control
Displayed features:
ON : socket turns on.
OFF : socket turns off.
AUTO : socket turns on/off automatically via timer.
Manual ON setting
Press [ON/AUTO/OFF" button to switch from [AUTO" to [ON".
This mode allows socket of the device to power up. Power indicator will light up.
Manual OFF setting
Press [ON/AUTO/OFF" button to switch from [AUTO" to [OFF".
This mode turns socket of the device off. Power indicators will turn off.
7. Electrical parameters
Operating voltage : 230VAC
Battery : NiMh 1.2V
Power consumption : < 0.9W
Response time : 1 minute
Power output : 230VAC/16A/3680W
Q&A
Q: Why won`t my timer turn on?
A: It`s out of battery, you can charge the timer by plugging onto any power outlet. Charge the device for at least 15 minutes. Then press [RESET " button to reset the device.
Q: Can I set seconds of the timer?
A: No, the smallest time unit is minute.
Q: Does my timer keeps old settings without being plugged onto a power outlet?
A: Yes, the timer has an internal battery, it allows the timer to save settings without a power outlet.
Q: Is the battery rechargeable?
A: Yes, the battery is rechargeable. We recommend to charge it for 4 hours so the battery is fully charged.
Q: Does the timer needs internet connection?
A: The timer does not need internet.
Q: Does the screen have back light function?
A: It doesn`t support back light.
digital timer, digital timer socket, electronic timer socket, timer socket NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com
On the 25th, the author learned from the Hebei Provincial Development and Reform Commission that in 2009, Hebei Province will promote 3 million state-subsidized high-efficiency lighting products, and the completion of tasks in each district and city will be included in this year's energy-saving target responsibility evaluation and assessment content.
According to reports, the high-efficiency lighting products and their specifications and prices promoted in Hebei Province were determined by the National Development and Reform Commission and the Ministry of Finance through unified bidding. They are Taiji and Hengdian Dezhou produced by Zhejiang Changxing Changsheng New Light Source Co., Ltd. Dezhou TOSPO brand self-ballasted fluorescent lamp produced by Electronics Co., Ltd., Oupu brand three-color double-ended straight tube fluorescent lamp (T8 type, T5 type and bracket) produced by Zhongshan Oupu Lighting Co., Ltd.; produced by Shanghai Yaming Bulb Factory Co., Ltd. The 1923 brand high pressure sodium lamp.
The financial subsidy method is: the central government subsidizes the price of the high-efficiency lighting products manufacturers, and the bulk users and urban and rural residents purchase at the subsidized price. The actual purchase price of bulk users is 70% of the supply price of the winning bid, and the actual purchase price of urban and rural residents is 50% of the bid price of the winning bid. The promotion work began in early July.
Lighting designer: residential lighting is moderately good 2009-06-25
The whole army promotes the use of high-efficiency lighting products to save 150 million kWh of 2009-06-25
Philips Fashion Lighting Museum Beijing Shilihe Opening 2009-06-25
Real estate giant Yang Guoqiang energy dream broke into LED lighting 2009-06-25
1 
