Sound card, also called audio card (known as sound card in Hong Kong and Taiwan): Sound card is the most basic component of multimedia, and it is a kind of hardware that converts real sound waves/digital signals into each other. The basic function of the sound card is to convert the original sound signal from the microphone, tape, and disc, and output it to a sound device such as a headphone, a speaker, a megaphone, a tape recorder, or the like, or make a wonderful sound through the digital home of the music device. Lithium Battery Pack,6V Lithium Battery Pack,6 Volt Lithium Battery,Crv3 Lithium Battery Jiangmen Hongli Energy Co.ltd , https://www.honglienergy.com
Sound card effect debugging First install the sound card hardware, in the CMOS to shield the original onboard sound card (the original independent sound card can be removed), then enter the CMOS to find Integrated Peripherals (integrated external device), behind the AC97 Audio Auto is modified to Disable, and then save the settings (different CMOS names are different, here is the most commonly used CMOS settings).
Then you can install the driver of the innovative 5.1 sound card. By default, the innovative 5.1 sound card driver can be installed and debugging can be started.
(1) Turn on the small speaker volume control on the far right side of the computer, we will choose the following few, because the other is not useful to us, it is recommended not to choose.
Unless you are linear input, that's another problem! After selecting the playback control and recording control, we will not need the control in the small speaker below.
If your voice is not big enough, click on the advanced level below the microphone. Enhanced +20Db
Note that the high and low sound adjustments in the advanced control below are useful for listening to yourself, but it is the same as when you are not adjusting, so we generally do not adjust (2) start - program (all programs) - Creative - Sound Blaster Live!—Creative Surround Mixer right mouse button to send to the desktop shortcut, because we often use the Creative Surround Mixer, the proposal is dragged to the bottom of the shortcut bar. The program interface as shown below appears:
(3) Run the Creative Surround Mixer program and the following interface appears.
First click on the advanced mode, the following 3 boxes without mute are not allowed to choose mute! Sometimes you are switching the sound you hear - the microphone will be automatically muted in the microphone, it is normal, remove the microphone to mute.
Key: The leftmost volume is the total volume control. Generally, we choose the largest, the high and low sounds next to it are the sounds that we listen to, and it has nothing to do with the ones you pass to others, so it is in the default state.
Waveform/MP3 is a volume control that controls the size of your own music and listens to other people's voices. This needs to be adjusted according to the accompaniment volume. The microphone is the size of the sound that it listens to or sings in the microphone. As long as the microphone does not scream, you can choose a bigger one.
Finally, the sound you hear, here must choose the sound you hear, otherwise you can hear the reverb effect, the same is not effective! The sound you hear is the amount of sound that someone else hears when you sing, and is not related to the size of the music (unless you are an external VCD).
As for MIDI, CD audio, linear input, auxiliary devices, CD numbers, phone answers, PC speakers don't need to be used now or whether they are muted or turned on.
(4) Open "Settings" This is the effect setting,
The first choice "custom" is modified to "speak" (in Chinese). The original sound in the middle box is not modified. The default 0.0DB is the largest.
Reverberation: According to my experiment, the Auditorium effect is more suitable, then choose this, pull the main reverberation amount at -14 (left and right), you can also choose your favorite reverb effect, then the following parameter -14 is not necessarily Yes.