It should be noted here that the cloud.RCD IP address is equivalent to the remote PLC's IP address, so the host computer side software, such as WinCC, Kingview, Force Control, KepwareOPC, STEP7, Portal, STEP7 MicroWin, When MicroWin Smart and other software communication connections are used, it is necessary to fill in the default address 192.168.1.50 of the RCD. (The IE browser address bar enters 192.168.1.222 to view and change). Dongguan Tuojun Electronic Technology Co., Ltd , https://www.fibercablessupplier.com
Siemens PLC Remote Communication Solution without Fixed IP
As shown in the figure, the figure shows the actual hardware connection diagram. The cloud field on the PLC side, the remote Adapter, and the cloud on the monitoring side of the computer, RCD can access the Internet through the router. No fixed IP is required, and the middle cloud server is used. To achieve docking at both ends, it is very convenient to use. The setting parameters only need to fill in the MAC addresses of the routers connected to both ends of the module and the MAC addresses of the connected PLCs (there is no need to set the connection through the PPI port or the MPI port).