Connector, CONNECTOR. Domestically referred to as connectors, plugs and sockets. Generally refers to electrical connectors. That is, a device that connects two active devices to transmit current or signals. The brands of connectors are Kanai, Nutric, Toshiba, Molex and so on. Connectors are a component that our electronic engineering technicians often come into contact with. Its role is very simple: to bridge the communication between the blocked or isolated circuits in the circuit, so that the current flows, so that the circuit achieves the intended function. Connectors are an indispensable part of an electronic device. You will always find one or more connectors when you look at the path through which the current flows. The form and structure of the connector are ever-changing. There are various types of connectors depending on the application object, frequency, power, and application environment. For example, the connector for lighting on the court and the connector for the hard drive, as well as the connector for igniting the rocket, are quite different. But no matter what kind of connector, it is necessary to ensure smooth and continuous current flow. In general terms, the connection of the connector is not limited to current. In today's rapid development of optoelectronic technology, in the optical fiber system, the carrier that transmits the signal is light, and the glass and plastic replace the wires in the ordinary circuit, but the optical signal Connectors are also used in the vias, which function the same as circuit connectors. Automotive connectors are a component that our electronic engineering technicians often come into contact with. Its function is to bridge the communication between the blocked or isolated circuits in the circuit, so that the current flows and the circuit realizes the predetermined function. The form and structure of automotive connectors are ever-changing. They are mainly composed of four basic structural components: contact, housing (depending on the type), insulators, and accessories. A. The contact piece is the core part of the car connector to complete the electrical connection function. The contact pair is generally composed of a male contact and a female contact, and the electrical connection is completed by the insertion of the female and male contacts. The male contact is a rigid part that is cylindrical (round pin), square (square pin) or flat (tab). Positive contacts are typically made of brass or phosphor bronze. The negative contact, that is, the jack, is a key component of the contact pair. It relies on the elastic structure to elastically deform when it is inserted into the pin, and generates an elastic force to form a close contact with the male contact to complete the connection. There are many types of jacks, such as cylindrical (groove, neck), tuning fork type, cantilever beam type (longitudinal slotted), folded type (longitudinally slotted, 9-shaped), box-shaped (square jack) And a double-curved wire spring jack; B. The housing is a cover of the automotive connector, which provides mechanical protection for the built-in insulating mounting plate and the pin, and provides alignment when the plug and the socket are inserted, thereby fixing the connector to the device; C. Insulators are also often referred to as automotive connector bases or inserts. Their function is to arrange the contacts in the desired position and spacing and to ensure contact and contact and housing. The insulation properties between. Good insulation, combined screws at both ends. 1. Connector insertion force: 20.5kg or less. The connector retains a force of 2.5 kg or more. Heat resistance 40~120 °C. 2. The material of the connector contacts is stable and reliable. The positive force is stable. 3. The voltage and current of the circuit are stable. Temperature requirements are within the specified range, including ambient temperature and own temperature rise. 4. Better robustness. It must be the same as the connector for high-speed long-distance communication computers, and the automotive connectors must work reliably under harsh conditions.
ZGAR bar 600 Puffs
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
Disposable Vape, bar 600puffs, ZGAR bar disposable, Disposable E-cigarette, OEM/ODM disposable vape pen atomizer Device E-cig ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.zgarette.com
