The Jaw Crusher is the originator of crushing equipment, and its customers use jaw crushers all over the world. Next, the experts of Red Star will give you general information about the common faults during the use of the jaw crusher, and hope to provide some convenience to users of the jaw crusher. Jaw crusher common failure check exclusion method: It is common for the hammer mills that have been overhauled and installed for the first time to experience strong vibrations during the test run. There are several reasons for this situation: (1) Wrong installation of hammer in inspection and assembly. When the hammers are used for face change, in order to prevent the weight of the rotor from being out of balance, all the hammers in the crusher must be turned over. Otherwise, strong vibrations may occur during operation. (2) The difference between the weights of the two sets of hammers exceeds 5 grams. The method of elimination is to adjust the hammer weight so that the difference between the corresponding two groups is less than 5 grams. (3) Individual hammers are too tight and do not throw away during operation. After the machine can be turned down, it can be turned by hand to find ways to make the hammer rotate flexibly. (4) The weight of other parts on the rotor is unbalanced. In this case, the balance needs to be carefully checked and adjusted separately. (5) Spindle bending deformation. The solution is to straighten or replace. (6) The bearing clearance exceeds the limit or is damaged. Replacement of new bearings is generally used to solve the problem. To learn more about Jaw Crusher, please visit Red Star's official website: Telephone consultation. Dc Fan Pcb,Bldc Ceiling Fan Pcb,Bldc Fan Pcb Price,Worcester Bosch Greenstar Fan Pcb Full Industrial CO.,ltd. , https://www.iotaindustrial.com
