The Canon 18-135 lens that was found to be used recently had a mold inside the front lens. It looked annoying to affect people's mood and affected their photos. Therefore, they bought some tools on Taobao and spent an hour on the National Day holiday to successfully dismantle. Mildew, now share the process with everyone. To emphasize, if it is a very expensive lens, because of its complicated structure, it is recommended to send professionals to repair! Well, on the map First of all, the air purifier runs at full speed and cleans the dust in the room. Remember to clean the hands before operation. Use a toothpick to extend into the small hole in the front washer, slowly tilt up the front washer It can be seen from the back of the front washer that the front washer is fixed to the front of the lens using something like a sticker Remove the front washer and you can see the three screws. Use a screwdriver to remove the three screws and washers. This is a Tic-Tac wrench Taobao sale Adjust the Tic-Tune Wrench to a suitable width, rotate counterclockwise into the groove to remove the front mirror It can be seen that there are a few molds above. Here, you are advised to pay attention to the protection of the lens. Do not regret it until you have a problem. After cleaning the cloth with clean cloth Put the front mirror back and use the mirror wrench to hold the groove and rotate it clockwise to assemble the front mirror. Prepare the screw, the screw gasket is right angle, remember to highlight that part of the alignment Then stick back the gasket Put the lens back and you're done I really want to warn you that you must pay attention to the protection of the camera. This camera has been with me for almost four years. Nothing happened in the first three years. I thought that there would be nothing, but it was in the fourth year. It was found to be moldy, and the next time we had to buy a special cabinet to put it back Customized Solar Panel, 100watt solar panel,200watt solar panel, big solar panel, high efficiency high quality solar modules
different power customized and OEM logo customized solar panel
Customized solar panel data
Customized Solar Panel,Noncrystalline Solar Panel Module,Cheap Price Pv Solar Module,Solar Photovoltaic Pv Panel PLIER(Suzhou) Photovoltaic Technology Co., Ltd. , https://www.pliersolar.com
This is the front mirror 
solar cell type
mono crystalline half cut cell
power range
50watt to max 700watt
size and weight
different size and different weight if the power is different
solar panel type
monofacial or bifacial
solar panel color
sliver or black
Product details and pic
