Like many tripods on this day, this tripod saw the Dostyle TP203, which was branded as "Belano AF18+". I hadn't picked up the car for the first time. It was worth buying the car for the first time. I was still a little excited. Three tripod express delivery to the company, please help colleagues to help with income and send two good friends to contact, and I finally personally touch this shelf is in two weeks. Dostyle belongs to JD.com's own brand. Some people said that they saw this brand auto-immunity. The reason was that I experienced it when I jumped into my own shop on the TP203 product page. I couldn't find this stand (July 2016). , Interested to see it. This is a huge tripod. It's not easy to buy such a big guy in more than two hundred pieces. There are fairly thick backpacks, black and red colors and brand logos, anyway, most people do not know, you can pretend to be used by tall people. Inside is the tripod's real body, and the instructions and accessories are in the zipper pocket inside the backpack. The tripod is larger than expected, and the length of 1125px after retraction is just enough to put into most ordinary backpacks. The thick and solid foot pipe is a real surprise. It is indeed an anodized aluminum alloy process, and the “corrosion-resistant, impact-resistant, high-temperature paint†of the publicity is not the most common pock-marking paint. It takes a little effort to deploy the leg tube - it's probably a bit less forceful than sucking milk, and the lockless structure with only a snap-on limit makes it a lot easier. The adjustment buckles can support three angles of high school, low level, and can be replaced with replaceable metal spikes (from the bottom of the foot tube, first screw down the default rubber nails and then installed) to deal with a variety of shooting scenes such as loose soft land, sand dunes, and shallow water. If you have to say that only three angles are optional, and the rest of the heights need to be adjusted by the central axis, this is not enough, and there is no such thing as a cheap recommended tripod. The foot tube is rotated and locked. Each section has an indication label for the direction of rotation. There is a little shaking between the upper and lower sections. It should be a common phenomenon below 1,000 yuan. I have used someone who is said to have a two-thousand-yuan aluminum alloy stand. This feeling, it really pays off. After the leg tube is fully opened, there are a total of four segments. The maximum height of the non-rising axis is 1.34m, which may be a little low for a person with a height of 1.8m. It should be noted that when using high-angle snaps, it is slightly unstable, and switching to medium angles will take up too much space. It seems that the design is not very good here. The locking method of the middle shaft is also spiral damping, which is usually not used for raising the middle shaft. The spring hook at the bottom can provide higher stability. Remove the spring hook to remove the shaft, and then turn down the specific leg tube, which can form a monopod, fast operation. This sponge has a sponge grip to provide anti-slip properties. After this time, they just caught up with the shooting activity, and ran this with a monopod all day. The actual measurement can provide good support for the D7000+ Sigma 18-35 (1.5kg in total). The following is a detachable ball head - a 36mm ball table with a scale on the bottom. The ball head is special in its use, and there is almost no limit to the shooting angle with the inversion of the axis. Because only damping is provided by the knob, the rotation without any resistance after the knob is released is a rare "cheap sense" experience of the TP203. The size of the double knob-locked ball head can largely prevent accidental “noddingâ€, provided that it is really tightly locked, and this must be ensured in some shots that require a strictly fixed viewing angle. While the angle of view is changing, this is also a short board of the ball head, which cannot be locked horizontally/vertically with a degree of freedom. This makes the ball head basically independent of the action of “shake the lensâ€. When it is necessary to adjust the angle of view in both the horizontal and vertical directions, the experience of the omnidirectional infinitely-shaped ball head will despair. A simple example is that this follow-up event has flag raising content. At the time, I was only in the best position. The idea was to shoot the flag-raiser with a low angle, then zoom out and follow the flag. The monopod's legs are all taken up and held on the ground for a short time. If there is a three-dimensional head, it will be very easy. Just unlock the vertical lock and follow. However, the ball head can only loosen the lock a little and carefully guarantees that the left and right cannot be moved. The final shot is just barely usable. The small quick release board does not provide a non-slip mat, and there is no camera limit. It is best to tighten it tightly when using it to prevent it from happening. A simple bubble level is provided on the side of the quick release plate, but unless the number of quick release plates is exceeded, the level will hide under the camera and it will not work. Pay attention to the quick interface shown in the figure above, using the more common two-stage knob, the value of friends after the rotation in place to pull out the knob, continue to rotate, to remove the quick plate and the camera above, provide a certain degree of security Sex. The feeling of use is not as good as the safety mechanism in the form of a wrench. After all, it is very difficult for the other hand to independently “pull the knob out†when one is holding the camera. In general, the 200-odd tripod can be equipped with an inverted center axle, a replaceable head, and a monopod mode, and the TP 203 must be one of several options for equivalence. In addition, the TP203 is not a very high requirement for backpacks and physical strength. It is a tripod that is very friendly to novices. I think that for a friend who wants to experience a tripod shot with 300 or less budgets, he can rest assured that he will be satisfied with the feelings of even the smallest surprise and the original desire to exercise (of course, if the original price of 499 was purchased, it may be unsatisfactory). At last At last, there was a lot of trouble. Nowadays, the business name has been very handy. The front said “corrosion-resistant high-temperature anti-corrosion paint,†and would like to talk about “high-strength magnesium alloy triangle seatâ€â€”it is the outer connection of the middle shaft sleeve. The position of the three legs should be magnesium aluminum alloy, aluminum alloy for short, but the magnesium alloy may sound more deaf, and whoever gets it... This reminiscent of "304 stainless steel" over the past two years: the kitchen knife 304, mobile phone 304, electric car 304, electric kettle 304 ... ... since the millet 304, what follows the trend 304. The austenitic 304 stainless steel is also sounding squeaky, and is practically the cheapest and most widely used stainless steel. Beamforming Microphone,Digital Array Microphone,Classroom Audio Solutions,Conference Array Microphone SZ REACH TECH,.CO LTD , https://www.szreachtech.com
1942e2a2d3b2d2dcd38a086f62b32001.jpg" />
