LED lamp energy saving is the trend of the times and product advantages

According to a survey, a fast-track operation branch carried out a LED green lighting renovation project on the lighting system of the development zone, and on the premise of guaranteeing the original illumination, all fluorescent lamps, metal halide lamps, and energy-saving lamps were replaced with small wattage LED lighting fixtures. Only this one can save 170,000 yuan in electricity bills each year.

LED light source is the development trend of the future lighting system. It has features such as high efficiency, stability, safety, reliability, environmental protection, and no harmful radiation. It has significantly improved power consumption and energy efficiency. Service life up to 50,000 hours. The entire station lighting renovation project in the development zone, the original design power 85002W, the actual power after the transformation is 26882W, saving power 58120W, saving rate of 70%. If calculated under the same conditions as the average of 8 hours a day, full-load operation, saving about 465.6 degrees per day, saving about 169710.4 degrees a year, such as 1 yuan per degree of electricity costs, annual electricity savings of 169710.4 yuan. This means that electricity savings of nearly RMB 1.7 million can be achieved in 10 years.

LED vs neon, incandescent, traditional energy-saving lamps

Compared with the traditional display media, colorful neon, pixel tube TV wall, four-color magnetic flap, etc., LED has high brightness, low failure, low energy consumption, long service life, good dynamic image display effect, and various display contents. , Rich display, quality, cost-effective advantages.

The successful development of ultra-bright LED nowadays makes it more and more used in the decoration of lanterns and even lighting. In order to coordinate the control, pure color, high light efficiency, low heat, and other advantages have gradually replaced the trend of traditional lighting sources, the industry has received widespread attention. The first thing that comes to mind when we talk about luminescence changes is that it is.

1, long life - the average life expectancy is greater than 20,000 hours.

2, can be made of different color temperature white lighting and a variety of colored decorative lighting.

3, high luminous efficiency, is 5 times that of incandescent lamps (ie, 5 times more energy than incandescent lamps).

4, quick start, good impact resistance, can be used to repeatedly change the lighting occasions and advertising.

5, due to long life, can be used to inconvenience to replace lamps occasions, such as the hotel lobby, the outline of high-rise buildings, subway tunnels.